Home | PRODUCTS | | WIRELESS MICROPHONES | IDOLmain UHF-X1 Professional Performance With Anti Feedback,Ultra Low Distortion, and Digital Pilot Technology Dual Wireless Microphone System NEW 2019
IDOLmain UHF-X1 Professional Performance With Anti Feedback,Ultra Low Distortion, and Digital Pilot Technology Dual Wireless Microphone System NEW 2019
UHF-X1 is a professional high-end wireless microphone system with solid structure built, reliable performance, anti feedback and auto digital pilot to avoid stringing frequency. It also has very good audio clarity and performance which can be used with other high-end audio equipment, karaoke bar, live concert and at home karaoke party.
Two wireless channels with one receiver
Beautiful and clear HD LCD Display
Sound curve is well adjusted to prevent warm sound
Built-in top quality audio processing chip,ultra low distortion sound and processing circuit design
Unique frequency matching with digital pilot technology to prevent frequency chaos
The use of advanced audio compression circuit, effectively inhibit the generation of noise
The precisions of circuit design, can meet normal use of poor weather conditions.
Microcomputer control of PLL phase- locked loop oscillation circuit, stable performance and easy setting.
Approximate working distance is 300 ft.
Energy saving with ECO-MODE - Automatic transferring to energy saving mode after 5 minute unused and automatic shutting down after 30 minutes unused to avoid over heat and save energy.
Frequency Range: 530-580MHz
Frequency Interval : 250KHz
Frequency Width : 50MHz
Frequency Oscillation Mode: PLL Phase Locked
Frequency Stability: ±5KHz
Reception Method: CPU Pilot Identification Reception
Silent Mode: Mute & Lock Loop Circuit
Signal to noise ratio: ≥50dB
Degree of distortion: <0.1%
Receiving distance: 100M
Function display mode: LCD
Material: Iron Shell, aluminum panel
Product weight: 10 lbs
How to scan new frequency and channel with auto pilot technology
1. Turn on a receiver
2. Turn off a microphone till it show “OFF”
3. Press and hold the power button of the microphone for 3 second till it shows” 658805” then shake slightly while sill holding the power button for auto scanning. The screen will show “Auto” then the new channel number will show and continue blinking for a few seconds. Now let go the power button. The new channel and frequency are set and good to go. Repeat the same procedure for another microphone.